Recovering Bricked (unbootable) Devices Using SD Card¶
If anything goes wrong and your device seems unbootable, you can use the previously created SD card image to recover the original firmware from the manufacturer by using the following commands:
python3 restore2factory.py backup/2ce9c4aab53c-2018-09-19/ your-miner-hostname-or-ip
After the script finishes, wait a few minutes and adjust the jumper to boot from NAND (internal memory).
BOSminer can be controlled using the command line or via the web page.
In order to start or stop BOSminer, use the following commands:
Alternatively, BOSminer can be controlled in System -> Startup page and it is restarted every time the user clicks on the Save & Apply button in the Miner -> Configuration page.